Description / Use

The SYMS III sealer is a bench top unit that can be used under laminar rlow hood and is using the “thermal” procedure to weld CBS High Security 0.3mL, 0.5mL and 2mL straws, CBS High Security Tubes as well as the HSV High Security Vitrification Straw.

Technical Specifications

Setup, maintenance and downtime time are approximately 5 minutes per day.

Potentially contaminated parts of the system can be cleaned with ethanol or non-corrosive decontamination fluids.

L x W x H: 363 x 276 x 152mm
Weight: 6kg
Power Supply: 110 or 220V/60 or 50Hz

Key Features

• Available in 3 languages (French, English or Spanish).
• Glove compatible touch screen interface.
• Easy-to-use touch screen advises user of the machines actions:
  heating up, ready, welding process, etc.
• Pre-set specific combination of seal temperature, time and jaw position for each CBS device.
• Two sealing modes: fully automatic straw detection system or touch screen operator control.
• Error management: alarm message on touch screen and audible signal.
• Electronic touch screen monitors and advises on the maintenance needs of the machine.
• Easy to clean and maintain.

Instructions For Use

• Place the CBS High Security straw of the CBS High Security tube holder;
• Place the straw or tube on the holder and gently push forward;
• Automatic mode: As soon as the sensor detects the straw or tube in the sealing position, the sealing process starts automatically.
• Manual mode: the straw or tube is sealed when the operator presses the ‘WELD’ button on touch screen.