Category: ART Consumables and Equipment’s

syms

SYSM

Manual sealer for CBS™ High Security Straws and vitrifcation straws

Reference Description Packaging
016399 SYMS sealer 1
009848 Spare kit for SYMS sealer 1

Cryo Bio System has developed a thermal pulse sealing device for impermeable sealing of CBS™ High Security straws in ionomeric resin. The sealing device is electronically operated by a push-button or foot pedal as desired.

Technical Specifications

Setup, maintenance and downtime time are approximately 5 minutes per day.
Potentially contaminated parts of the system can be cleaned with ethanol or non-corrosive decontamination fluids.

Dimensions (L x W x H) : 230 x 220 x 170 mm
Weight: 6 kg (13 lb)
Electrical requirements: 220V/50 Hz or 110V/60 Hz

nano digitcool freezer

Nano-Digitcool Controlled Rate Freezer, Compact And Efficient

The best compact freezer for day-to-day use in ART centers!

Description / Use

Controlled-rate freezing of all biological products (eg. plasma, all blood cells, human tissues, gametes). The stainless steel Digitcool freezer is fully programmable and easy to disinfect.

  • Latest addition to our Digitcool line
  • Vertical nitrogen flow with vaporization
  • PC or stand-alone operation
  • CryoBioSoft traceability software
  • Bags, straws and tubes freezing
  • Visual LED system for freezing steps

Technical Specifications

  • Dimensions : 722 x 475 x 472mm
  • Weight : 55 Kg (121 lb)
  • Dimensions of the chamber (Inside) : 238 x 178 x 200mm
  • Volume : 11.5 litres
  • Capacity : 33 straws 0.5 mL
  • Power (Heater) : 1200 w
  • Voltage / Frequency : 220 v / 50 Hz / 8 A
Reference Description Packaging
025680 Nano-Digitcool freezer 1
025433 Tubes rack for Nano-Digitcool 1
024572 Straws rack for Nano-Digitcool 1
025327 DF 200 bags rack for Nano-Digitcool 1

syms iii

SYMS III

Unique sealer for CBS High Security straws and tubes

Description / Use

The SYMS III thermally seals 0.3 mL, 0.5 mL and 2 mL CBS™ High Security straws as well as CBS™ High Security Vitrification straws and CBS™ High Security Tubes for top quality cryopreservation of biological samples.

Key Characteristics

  • A multilingual interface (French, English, Spanish and Chinese) + 4 optional languages
  • A color touch screen that can be used while wearing laboratory gloves
  • View of the machine cycles: preheating, ready status, sealing in progress, etc.
  • Specially adapted pre-programming for each CBS™ product’s sealing temperature and time
  • Two sealing methods: fully automatic detection or operator-controlled via the touch screen
  • Alarms and alert messages signal faults
  • Tracking display and maintenance modes display
  • Easy to clean and maintain

Technical Specifications

Dimensions (L x W x H) : 335 x 250 x 105 mm
Weight: 3 kg
Power Supply: 110 or 220 v / 60 or 50 Hz

Reference Description Packaging
025547 SYMS III sealer 1
026550 Sealing jaws set for SYMS III 1

syso

SYSO

New automatic equipment for CBS High Security Tubes opening

Description / Use

The SYSO opening machine is a worktop device for lab benches which can be used under laminar flow. It uses a hot wire to open CBS™ High Security Tubes.

Key Characteristics

  • The carrousel can hold up to 6 CBS™ High Security Tubes, opened individually or in succession.
  • Easy, intuitive touch screen
  • 8 languages
  • The wire is systematically sterilized by pyrolysis after each tube is opened.

Technical Specifications

L x W x H: 358 x 275 x 157 mm
Weight: 2.5 kg
Power Supply: 110 or 220 v / 60 or 50 Hz

Reference Description Packaging
024922 SYSO automatic equipment 1

pace

PACE

Semi-automatic filling and sealing system for CBS High Security Straws

Description / Use

From an open primary sample tube, PACE automatically fills and thermally seals both ends of CBS™ High Security 0.3 or 0.5 mL straws – which can be pre-identified. PACE is the ideal CBS™ machine for managing medium- or large-scale collection protocols. PACE is compatible with CBS™ High Security straws that are pre-identified with barcodes and/or alphanumerical codes, and those that are not yet identified. The system includes a filling and sealing unit and a control box.

General Characteristics

The throughput of straws is fully dependent on the protocol (e.g. number of straws filled per primary tube and the number of different biological products).
Setup, maintenance and shutdown: 15 minutes per day.

All potentially contaminated parts can be cleaned with ethanol or non-corrosive decontamination fluids.

The PACE system can be placed on the laboratory bench or under laminar flow with sterile straws and filling tubing and only needs power supply.

Technical Specifications

PACE – L x W x H: 380 x 300 x 370 mm – Weight: 25 kg

Control box – L x W x H: 410 x 365 x 155 mm – Weight: 14 kg

Power supply: 110 or 220 V / 60 or 50 Hz

A PACE can be configured for CBS™ 0.3 or 0.5 mL straws.

Reference Description Packaging
018451 PACE 220 V / 50 Hz 1
018450 PACE 110 V / 60 Hz 1
007454 Sterile CBS™ injection tubing (by 5 x 10) 50
018620 Sterile long blue CBS™ injection tubing (by 5 x 5) 25
007451 Sterile CBS™ aspiration tubing (by 5 x 10) 50

mapi

MAPI

Automatic filling, sealing and printing system for CBS High Security Straws

Description / Use

From an open primary sample tube, MAPI automatically fills CBS™ 0.3 or 0.5 mL straws, thermally seals both ends, prints bar codes and/or alphanumerical identification on the jacket and in-line validates the process by immediate bar code reading.

The MAPI system consists of the filling robot and its control box, a special ink-jet type printer and a PC with the MAPI pilot software. The automate is placed on a special laboratory bench at ergonomical height.

General Characteristics

The throughput of straws is fully dependent on the protocol (e.g. number of straws filled per primary tube and number of different biological products).
Setup, maintenance and shutdown: 15 minutes per day. All potentially contaminated parts can be cleaned with ethanol or non-corrosive decontamination fluids. The ink-jet printing system requires active evacuation of its solvent vapors.

MAPI Pilot Software

The MAPI pilot software is installed on the PC provided with the system to pilot the machine cycle of the MAPI system: distribution, filling, sealing, printing and re-reading of straws. The code to be printed on the straw can be either a bar code read from the primary tube, keyboard entered or programmed fixed text.

Technical Specifications

MAPI – L x W x H: 760 x 260 x 470 mm – Weight: 35 kg

Support table – L x W x H: 1200 x 600 x 900 mm – Weight with machine: 102 kg

Control box – L x W x H: 430 x 380 x 190 mm – Weight: 14 kg

Printer Domino control box – L x W x H: 650 x 450 x 375 mm – Weight: 20 kg

Reference Description Packaging
007218 MAPI automatic system 1
007454 Sterile CBS™ injection tubing (by 5 x 10) 50
018620 Sterile long blue CBS™ injection tubing (by 5 x 5) 25
007451 Sterile CBS™ aspiration tubing (by 5 x 10) 50

cbs visotubes goblets

CBS Visotubes And Goblets

Description / Use

Freezing and storage of biological materials in straws.

CBS High Security Straws are placed in goblets for storage in freezers. Goblets come in 8 different colors and their sub-compartments (called Visotubes) in 12 different colors.

In the Daisy configuration, Goblets hold 12 Visotubes of different colors and can hold a maximum of 168 CBS Straws of 0.3 ml or 0.5 mL.

Reference Description
006330 ID rod for visotube (thin diameter) – White
006332 ID rod for visotube (thin diameter) – Yellow
006777 ID rod for visotube (thin diameter) – Red
006779 ID rod for visotube (thin diameter) – Pink
006786 ID rod for visotube (thin diameter) – Orange
006787 ID rod for visotube (thin diameter) – Grey
006331 ID rod for visotube (large diameter) – Yellow
006762 ID rod for visotube (large diameter) – White
006763 ID rod for visotube (large diameter) – Dark Red
006774 ID rod for visotube (large diameter) – Grey
006875 ID rod for visotube (large diameter) – Orange
006876 CBSTM High Security Co-X Straw 0.3 mL – Pink

bmp printers

BMP-21 And BMP-51 Printers

Description / Use

Identification of CBS™ High Security straws and CBS™ High Security Vitrification straws.
Brady’s laboratory labels are designed to withstand extreme laboratory environments.
12-month warranty.

Warning

Using our LN2 resistant labels, it is strongly recommended to overlap the label on the straw.

Technical Specifications

Print method: Thermal transfer (durable, non-smearing)
Multiple line printing

BMP-21 Printer

Weight: 0.750 kg
L x W x H: 228.6 x 114.3 x 63.5 mm

BMP-51 Printer

Weight: 1.2 kg
L x W x H: 262 x 91 x 152 mm
Operating temperature: +4℃ to +49&#8451 (+39℉ to +120℉)
FCC Class A approved (printer)
UL and CSA approved (tapes)

Reference Description Packaging
024498 BMP-21 Printer 1
024500 AC adaptor 220V for BMP-21 Printer 1
024499 Hard case for BMP-21 Printer 1
024501 White polyester ribbon 9.5mm for BMP-21 Printer 1
025445 BMP-51 Printer + Labelmark 5 software 1
025446 BMP-51 Printer 1
025450 Self-protected large label for CBS tube 1
025451 Self-protected small label for CBS tube 1
026433 White polyester ribbon 9.5mm for BMP-51 Printer 1
026434 White polyester ribbon 12.7mm for BMP-51 Printer 1

micro aspirator

Micro Aspirator

Description / Use

Manual straw filling.
The micro-aspirator is used to manually fill all straws manufactured by Cryo Bio System without any risk of contamination.

Instructions for use

  • Hold the aspirator in a horizontal position.
  • Carefully push the straw into the adaptor and aspirate the liquid. The tube length should be about 10 cm.
  • Slowly turn the thumb wheel towards the adaptor until reaching the correct filling height.
  • Remove the straw just underneath the adaptor.

No special maintenance is required.

Reference Description Packaging
014498 Micro-aspirator (delivered with one extra unit of tubing) 1
014500 Extra nozzle tubing for micro-aspirator 1

canisters

Canisters

Description / Use

Cryo Bio System Canisters are the sleeves that hold the goblets. They are compatible with all types of liquid nitrogen and vapor freezers, and also low-temperature mechanical freezers.

Five lengths of canisters are available, with a capacity of 2 to 6 goblets stored on top of each other. A colored flag can be placed on the lifter to facilitate retrieval.

Canisters are placed in the nitrogen freezer before filling the container with liquid nitrogen. Goblets are introduced and retrieved one by one with the metal lifter; all manipulation of goblets is in the cold environment of the neck of the nitrogen freezer to ensure the stable low temperature of the samples.

Reference Description Packaging
007147 2-shelf 65 mm without cover – Packaging 10
007148 3-shelf 65 mm without cover – Packaging 10
007149 4-shelf 65 mm without cover – Packaging 10
007150 5-shelf 65 mm without cover – Packaging 10
007151 6-shelf 65 mm without cover – Packaging 10
Reference Description Packaging
008644 2-shelf Packaging 1
008645 3-shelf Packaging 1
008646 4-shelf Packaging 1
007198 5-shelf Packaging 1
007199 6-shelf Packaging 1
Reference Description Packaging
007328 White Packaging 10
015693 to 015699 Yellow, Salmon, Pink, Dark Green, Turquoise, Orange, Parma Packaging 10
015706 Grey Packaging 10
Reference Description Packaging
014175 Set of 2 indelible black markers for labeling straws and goblets Packaging 4
Reference Description Packaging
026923 Tweezers 14cm length Packaging 1
026924 Medium forceps 23cm length Packaging 1
026925 Long forceps 110cm length Packaging 1